You need some ordinary every day type scotch tape like that shown here.
To get the machine to accept the quarter, you have to cover the hole through which the quarter fell or make the raceway inside the mechanism slightly narrower. The kind Grandma used to have.
Drop in a few tokens and watch them ride down the slide. Some adjustment may be necessary for reliable feeding. Also if you already inserted three coins and are not in credit mode all after the third coin are rejected until you play it out.
Adjust the position of the wire or screws if the quarter gets stuck. Open the front of the machine and look at the back of the front door. Turn off the machine and unscrew the coin mechanism from the inside of the door.
Power on the machine. The machine won't operate normally until the door is locked.
The reason they fall out the back is because they are slightly shorter than the token and the square hole cut out in the slide allows the top edge of the quarter to fall out and not the token.
Close the machine door and lock it after you have made the adjustments. Gently snap the tabs back into place.
Quarter Conversion for Universal and Aruze Type Pachislos Using your key, open the front of the machine and locate the coin mechanism as shown in Fig. Ships in 48 Hours of order receipt or less Search this site Step 1: When the new models hit the parlors, the old ones become outdated and eventually find their way to foreign markets.
Reconnect the wires and attach the coin mechanism to the door. Then snap in the other side.
Adjust the position of the bottom rail in the coin mechanism upward if the machine has a vertical coin slot. Then drop a few quarters and watch them fall out the back of the slide. Cover the hole through which the quarter fell, if there how much is tecno c8 in slot nigeria one, with cellophane tape.
Loosen the screws holding the rail with a screwdriver and reposition them in their slots so that the raceway is slightly narrower.
Loosen both screws and center them in their respective slots. Slot machines are called pachi-slo in Japan, and they are part of an industry fueled by manufacturers who regularly roll out new models. Plug in the machine and turn on the main power switch, usually located just above the coin hopper.